P220f Color Monitor
User Guide
Guide de l’utilisateur
Bedienungsanleitung
Guía del usuario
Guida dell’utente
Guia do usuário
Användarhandbok
Руководство пользователя
Podręcznik użytkownika
2
1
With Plug & Play✘
22" (20" Viewable Diagonal)
Panduan Pengguna
Copyright © ViewSonic Corporation, 2004. All right reserved.
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and other countries.
ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of
ViewSonic Corporation.
VESA is a registered trademark of the Video Electronics Standards Association. DPMS and DDC
are trademarks of VESA.
®
ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency (EPA).
®
As an ENERGY STAR partner, ViewSonic Corporation has determined that this product meets the
®
ENERGY STAR guidelines for energy efficiency.
Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions
contained herein; nor for incidental or consequential damages resulting from furnishing this
material, or the performance or use this product.
In the interest of continuing product improvement, ViewSonic Corporation reserves the right to
change product specifications without notice. Information in this document may change without
notice.
No part of this document may be copied, reproduced, or transmitted by any means, for any purpose
without prior written permission from ViewSonic Corporation.
Electronic Warranty Registration
To meet your future needs, and to receive any additional product information as it becomes available,
For Your Records
Product Name:
Model Number:
Document Number:
Serial Number:
Purchase Date:
ViewSonic P220f
VS10284
A-CD-P220f-4
______________
______________
Product disposal at end of product life
ViewSonic is concerned about the preservation of our environment. Please dispose of this product
properly at the end of its useful life. For TCO'03 recycling information, please refer to our website:
3. Taiwan: recycle.epa.gov.tw
ViewSonic
P220f
2
Getting Started
Congratulations on your purchase of a ViewSonic color monitor.
Important! Save the original box and all packing material for future shipping
needs.
NOTE: The word “Windows” in this user guide refers to the following refers
to the following Microsoft operating systems: Windows ‘95, Windows NT,
Windows ‘98, Windows 2000, Windows ME (Millennium) and Windows XP.
Package Contents
Your package includes:
• Color monitor
• DB-15 video cable
• Power cord
•
ViewSonic Wizard CD-ROM
The CD jacket contains the Quick Start Guide, and the CD includes the
NOTE:
User Guide PDF files and INF/ICM display optimization files. The INF file
ensures compatibility with Windows operating systems, and the ICM file (Image
Color Matching) ensures accurate on-screen colors. ViewSonic recommends
that you install both files.
Precautions
• For best viewing conditions sit at least
• Place your monitor in a well ventilated
area. Do not place anything on the
20" from the monitor.
monitor that blocks the ventilation slots
or prevents adequate dissipation of heat.
• Do not place heavy objects on the
monitor, video cable, or power cord.
• If smoke, abnormal noise, or strange
odor is present, immediately switch the
monitor off and call your dealer or
ViewSonic. It is dangerous to operate
your monitor under these conditions.
• Keep the monitor away from magnets,
motors, transformers and televisions.
• AVOID TOUCHING THE SCREEN
WITH YOUR FINGERS. Oils from the
skin are difficult to remove.
• NEVER REMOVE THE REAR
COVER. The monitor contains high-
voltage parts. You may suffer serious
injury if you touch these parts.
• Avoid exposing the monitor to direct
sunlight or another heat source. The
monitor should be facing away from
direct sunlight to reduce glare.
• Do not place your monitor near a source
of water or moisture.
ViewSonic
P220f
3
Quick Installation
1 Connect video cable(s)
4 Install Display Optimization files
Make sure both the monitor and computer
are powered OFF.
(1) Insert the ViewSonic wizard CD-ROM
into your computer’s CD-ROM drive.
• Connect the video cable to the computer
Macintosh users: Models older than G3
require a ViewSonic Macintosh adapter.
Attach the adapter to the computer and plug
the video cable into the adapter.
To order a ViewSonic® Macintosh adapter,
contact ViewSonic. See Customer Support
in this user guide.
NOTE: if your computer does not have a
CD-ROM drive, see the Customer Support
section of this user guide.
(2) Wait for the CD-ROM to auto-start.
NOTE: if the CD-ROM does not auto-start:
double-click on the CD-ROM icon in
Windows Explorer, then double-click on
viewsonic.exe
2 Connect power cord
(3) Follow the on-screen instructions.
5 Windows users: Set the Timing
Mode (resolution and refresh rate)
Connect the power cord from the monitor to
a properly grounded AC outlet.
3 Power-ON monitor and computer
Example: 1600 X 1200 @ 85 Hz.
Power-ON the monitor, then power-ON the
computer. This sequence (monitor before
computer) is very important.
For instructions on changing the resolution
and refresh rate, see the user guide for your
computer's graphics card.
NOTE: At this point Windows users may
receive a message asking them to install the
P220f INF file.
Installation is complete. Enjoy your new
P220f monitor!
To be best prepared for any future customer
service needs:
Write the serial number (see back of the
monitor) in “For your Records” on page 2
of this guide.
Register the warranty of your monitor on the
Internet at: www.viewsonic.com
Port for DB-15
video cable
Power Cord
from monitor
to AC outlet
Power Cord
from computer
to AC outlet
ViewSonic
P220f
4
Using the Monitor
Setting the Timing Mode
Setting the timing mode is important for maximizing the quality of the
screen image and minimizing eye strain. The timing mode consists of the
resolution (example 1280 x 1024) and refresh rate (or vertical frequency;
example 75 Hz). After setting the timing mode, use the OnView® controls
to adjust the screen image.
The recommended timing mode for this monitor is:
VESA 1600 x 1200 @ 85 Hz.
To set the Timing Mode:
1 Set the resolution: Right-click on the Windows® desktop > Properties >
Settings > Desktop Area (Screen Area for Windows 95 and newer) > set the
resolution.
2 Set the refresh rate: See your graphic card's user guide for instructions.
NOTE: To minimize the adjustments required for an optimal screen image,
select a timing mode from the Preset Timing Modes table below.
Preset Timing Modes
VGA 640 x 480 @ 60 Hz
VGA 720 x 400 @ 70 Hz
VESA 800 x 600 @ 85 Hz
VESA 1024 x 768 @ 75 Hz
VESA 1024 x 768 @ 85 Hz
VESA 1280 x 1024 @ 75 Hz
VESA 1280 x 1024 @ 85 Hz
VESA 1600 x 1200 @ 75 Hz
VESA 1600 x 1200 @ 85 Hz
VESA (GTF) 2048 x 1536 @ 60 Hz
Macintosh 1152 x 870 @ 75 Hz
WARNING: Do NOT set the graphics card in your computer to exceed the
maximum refresh rates; doing so may result in permanent damage to your
monitor.
Timing Modes with Maximum Refresh Rates
2048 x 1536 NI @ 68 Hz
1920 x 1440 NI @ 73 Hz
1600 x 1200 NI @ 87 Hz
1280 x 1024 NI @ 101 Hz
1152 x 864 NI @ 118 Hz
1024 x 768 NI @ 132 Hz
800 x 600 NI @ 160 Hz
640 x 480 NI @ 160 Hz
(NI = Non Interlaced)
ViewSonic
P220f
5
OSD Lock Settings
You have the option of using the On Screen Display (OSD) locking feature,
OSD LOCK, to prevent unwanted changes to the current image settings.
• OSD Lock: Press and hold the [1] and [▼] buttons on the face of the monitor
for 5 seconds. The message “OSD LOCK” will then display briefly,
indicating that the OSD image settings are now locked.
• OSD Unlock: Press and hold the [1] and [▼] buttons again for 5 seconds. The
message “OSD UNLOCK” will then display briefly, indicating that the OSD
image settings are now unlocked.
ViewSonic
P220f
6
Adjusting the Screen Image
Beginning with the Main Menu shown below, use the buttons on the front
control panel to adjust the OnView® controls which display on the screen. The
OnView controls are explained in the four steps at the top of the next page and
are further explained on pages 8-10.
IMPORTANT: The monitor should be warmed up for 30 minutes prior to
making any adjustments.
Main Menu with OnView controls
1
2
Front Control Panel
Power Light
Power On/Off
Zoom expands and contracts the entire screen image
2
1
Displays control screen for
highlighted control (or pair
of controls). Also, toggles
between pairs of controls on
some control screens.
Displays Main Menu;
also saves changes/
exits Main Menu.
Scrolls through menu
options and adjusts
the displayed control.
ViewSonic
P220f
7
To adjust the screen image:
1 To display the Main Menu (parts 1-3 shown below), press button [1].
With Main Menu
highlighted, as
shown on the left,
press button [2] to
toggle to the next
Main Menu.
With a control
highlighted, button [2]
displays a control
screen for making
adjustments.
2 To select a control you want to adjust, press the arrow buttons on the front
control panel of your monitor (▼▲) and scroll through the choices.
When the control you want to adjust is highlighted, press button [2].
NOTE: Some controls on the Main Menu are listed in pairs, such as
Contrast/Brightness. Press button [2] to toggle between control pairs after
displaying a control screen.
3 To adjust the selected control, press the arrow buttons (▼▲).
4 To save the control setting and Exit the menu, press button [1] twice.
ViewSonic
P220f
8
Main Menu Controls
The menu items shown below can be adjusted by using the arrow buttons (▲▼)
on the front of your monitor.
Control
Explanation
Contrast adjusts the difference between the image
background (black level) and the foreground (white level).
Shortcut: Before displaying the Main Menu, press ▼ or ▲
to display the Contrast/Brightness control screen.
Brightness adjusts the background black level of the screen
image.
Horizontal Position moves the screen image left or right.
Horizontal Size adjusts the width of the screen image.
Vertical Position moves the screen image up or down.
Vertical Size adjusts the height of the screen image.
Zoom expands and contracts the entire screen image.
Pincushion straightens curves along the vertical edges of
the screen image that bow inward or outward.
Pin Balance straightens curves along the vertical edges of
the screen image that bow in the same direction.
Trapezoid adjusts the top and bottom of the screen image
until they have equal length.
Parallel slants the vertical edges of the screen image until
they are parallel.
Tilt rotates the entire screen image.
Degauss removes the build-up of magnetic fields that can
cause irregular colors to appear around the edges of screen
images. Your monitor will degauss automatically each time
you power it on.
ViewSonic
P220f
9
Control
Explanation (Continued)
To degauss your monitor manually, select Degauss on the
on-screen menu and press button [2].
Important: Do not degauss repeatedly. Doing so can be
harmful to the monitor. Wait at least 20 minutes before using
this control again.
ViewMeter® displays information about the video signal
coming from your computer’s graphics card. This includes
the refresh rate (or Vertical Frequency) and the scan rate
(or Horizontal Frequency).
ViewMatch® Color provides several color options: three
preset color temperatures and User Color, which allows you
to adjust red (R), green (G), and blue (B). The factory
setting for this product is 9300K (9300 Kelvin).
9300K — Adds blue to the screen image for cooler white
(often used in office settings with fluorescent lighting).
6500K — Adds red to the screen image for warmer white
and richer red.
5000K — Adds blue and green to the screen image.
User Color — Individual adjustments for red and blue
(green fixed).
OSD Position allows you to move the on-screen menus and
control screens.
Moire reduces interference patterns that appear as ripples,
waves, or unwanted background color textures. Interference
patterns of this type are most noticeable when viewing
images having closely spaced lines or finely detailed
patterns.
Language allows you to choose from among several
languages for the menus and control screens: English,
French, German, Italian, Spanish, Traditional Chinese and
Simplified Chinese.
H. Convergence (Horizontal Convergence) adjusts vertical
color alignment. Use this control when red or blue borders
are present around the vertical segments of black letters on a
white background.
V. Convergence (Vertical Convergence) adjusts horizontal
color alignment. Use this control when red or blue borders
are present around the horizontal segments of black letters
on a white background.
ViewSonic
P220f
10
Control
Explanation (Continued)
V. Linear (Vertical Linearity Center) adjusts the vertical
distortion at the center of the screen image.
NOTE: Vertical Linearity Center is an advanced control and
should be used for setup and calibration only.
V. Linear Sym (Vertical Linearity Symmetry) minimizes the
distortion (squeezing or stretching) images between the top
and bottom of the screen image.
NOTE: Vertical Linearity Symmetry is an advanced control
and should be used for setup and calibration only.
Top Hooking straightens the top corners of the screen
image.
Bottom Hooking straightens the bottom corners of the
screen image.
Purity adjusts the uneven color of the overall image. For
example, if one area of a color appears darker than another
area, first use the degauss feature. If color is still uneven,
use the purity control.
Top Left (Purity) adjusts uneven color at top left corner of
screen.
Top Right (Purity) adjusts uneven color at top right corner
of screen.
Bottom Left (Purity) adjusts uneven color at bottom left
corner of screen.
Bottom Right (Purity) adjusts uneven color at bottom right
corner of screen.
Data Recall returns adjustments to the original factory
settings if the product is operating in a Preset Timing Modes
(see the table at the bottom of page 11).
Exception: This control does not affect changes made with
the User Color control.
ViewSonic
P220f
11
Other Information
Specifications
CRT
Type
22” (20.0” viewable diagonal area),
0.24 mm aperture grill pitch,
90o deflection
RGB, medium-short persistence
Anti-reflection, anti-static coating
Standard light transmission rate = 38.4%
Phosphor
Glass surface
Input Signal
Video
Sync
RGB Analog (0.7 Vp-p, 75 Ohms)
fH: 30-110 kHz, fv: 50-160 Hz
HV Separate (TTL), Composite
Compatibility
PC
VGA up to 2048 x 1536
Power Macintosh (may require Macintosh adapter)
Macintosh1
Timing Modes with
Maximum Refresh
Rates2
2048 x 1536 NI @ 68 Hz 1280 x 1024 NI @ 101 Hz
1920 x 1440 NI @ 73 Hz 1152 x 864 NI @ 118 Hz
1856 x 1392 NI @ 75 Hz 1024 x 768 NI @ 132 Hz
1792 x 1344 NI @ 78 Hz 800 x 600 NI @ 160 Hz
1600 x 1200 NI @ 87 Hz 640 x 480 NI @ 160 H
Power
Voltage
AC 90-264V (auto switch) 50/60 Hz
Display Area
Default
Full scan
396 mm (H) x 297 mm (V) (Typical)
400 mm (H) x 300 mm (V) (Depends on signal timing)
Operating
Conditions
Temperature
Humidity
Altitude
32° F to 104° F (0° C to +40° C)
5% to 95% (no condensation)
To 10,000 feet
Storage Conditions
Dimensions
Temperature
Humidity
Altitude
-40° F to +140° F (-40° C to +60° C)
5% to 95% (no condensation)
To 40,000 feet
Physical
(monitor)
500 mm (W) x 504.3mm (H) x 526.1mm (D)
19.7” (W) x 19.8” (H) x 20.7” (D)
Weight
Net
32.0 kg (70.4 lb.) (monitor only)
Regulations
UL1950, cUL, DHHS, FCC, ICES-003, Class-B, (EPA) Energy Star, CE, CB,
PCBC, TUV/GS, BSMI, C-Tick, CCC, TUV/Ergo, GOST-R, PSB, TCO03
(TCO99 for black model)
Power Saving
Modes
On
Off
< 170W NORMAL (Green LED)
< 4W (Orange LED)
1 Macintosh models prior to G3 require a Macintosh adapter. To order a Macintosh adapter, contact
ViewSonic Customer Support. You will need to provide serial number of the product.
2 Warning: Do NOT set the graphics card in your computer to exceed these Maximum Refresh Rates;
doing so could result in permanent damage to the monitor.
ViewSonic
P220f
12
Troubleshooting
No power
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is securely connected to the back of the monitor
and to a power outlet.
• Plug another electrical device (like a radio) into the power outlet to verify that
the outlet is supplying proper voltage.
Power on but no screen image
• Make sure the video cable supplied with the monitor is tightly secured to the
video output port on the back of the computer. If the other end of the video cable
is not attached permanently to the monitor, tightly secure it to the monitor.
• Adjust brightness and contrast.
• Verify whether an adapter is required for proper signal continuity between
graphics card and monitor.
Flickering
• Not enough power supplied. Connect the monitor to a different outlet. If
using a surge protector, reduce the number of devices plugged in.
• Check the ViewMeter® from the main menu to verify the refresh rate (vertical
frequency) is 75 Hz or higher. See “Specifications” on page 12.
• Remove any devices from the area around the monitor that emit magnetic
fields such as radios, surge protectors, unshielded speakers, fluorescent
lights, AC power converters, desk fans, etc.
• Make sure the graphics card in your computer can use non-interlaced mode at
the desired frequencies. To enable your graphics card to support higher
refresh rates, try selecting fewer colors or running lower resolutions.
Wrong or abnormal colors
• If any colors (red, green, or blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector
could cause an improper connection.
• Connect the monitor to another computer.
• Select Degauss from the Main Menu. Do this only once.
• If you have an older graphics card, contact ViewSonic® Customer Support.
Entire screen image (rolls) vertically
• Make sure video input signals are within the monitor's specified frequency range.
• Try the monitor with another power source, graphics card, or computer system.
• Connect the video cable securely.
Control buttons do not work
• Press only one button at a time.
ViewSonic
P220f
13
Customer Support
For technical support or product service, see the table below or contact your
reseller.
NOTE: You will need the product serial number.
Country/
Region
Web site
T = Telephone Email
F = FAX
United States
support
T: (800) 688-6688
F: (909) 468-1202
service.us@
viewsonic.com
Canada
support
T: (800) 688-6688
F: (909) 468-1202
service.ca@
viewsonic.com
United Kingdom
service.eu@
viewsoniceurope.com
F: (01293) 643910
Europe, Middle
East, Baltic
countries, and
North Africa
www.viewsoniceurope.com Contact your
reseller
service.eu@
viewsoniceurope.com
Zealand
T: +61 2 9906 6277 service@au.
F: +61 2 9906 6377 viewsonic.com
Singapore/
Malaysia/Thailand
T: 65 273 4018
F: 65 273 1566
service@sg.
viewsonic.com
South Africa/
Other countries
T: 886 2 2246 3456 service@sd.
F: 886 2 8242 3668 viewsonic.com
Hong Kong
T: 886 2 2246 3456 service@hk.
F: 886 2 8242 3668 viewsonic.com
ViewSonic
P220f
14
Cleaning the Monitor
• MAKE SURE THE MONITOR IS TURNED OFF.
• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE
SCREEN OR CASE.
To clean the screen:
1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and
other particles.
2 If still not clean, apply a small amount of non-ammonia, non-alcohol based
glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1 Use a soft, dry cloth.
2 If still not clean, apply a small amount of a non-ammonia, non-alcohol
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then
wipe the surface.
DISCLAIMER
ViewSonic® does not recommend the use of any ammonia or alcohol-based
cleaners on the monitor screen or case. Some chemical cleaners have been
reported to damage the screen and/or case of the monitor. ViewSonic will not be
liable for damage resulting from use of any ammonia or alcohol-based cleaners.
ViewSonic
P220f
15
Limited Warranty
VIEWSONIC CRT MONITORS
What the warranty covers:
ViewSonic warrants its products to be free from defects in material and workmanship during the
warranty period. If a product proves to be defective in material or workmanship during the warranty
period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement
product or parts may include remanufactured or refurbished parts or components.
How long the warranty is effective:
ViewSonic® color CRT monitors, including the display tubes, are warranted for three (3) years for all
parts and three (3) years for all labor from the date of the first consumer purchase.
Who the warranty protects:
This warranty is valid only for the first consumer purchaser.
What the warranty does not cover:
1. Any product on which the serial number has been defaced, modified or removed.
2. Damage, deterioration or malfunction resulting from:
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
b. Repair or attempted repair by anyone not authorized by ViewSonic.
c. Any damage of the product due to shipment.
d. Removal or installation of the product.
e. Causes external to the product, such as electrical power fluctuations or failure.
f. Use of supplies or parts not meeting ViewSonic’s specifications.
g. Normal wear and tear.
h. Any other cause which does not relate to a product defect.
3. Removal, installation, and set-up service charges.
How to get service:
1. For information about receiving service under warranty, contact ViewSonic Customer
Support. You will need to provide your product's serial number.
2. To obtain service under warranty, you will be required to provide (a) the original dated sales slip, (b)
your name, (c) your address, (d) a description of the problem, and (e) the serial number of the
product.
3. Take or ship the product freight prepaid in the original container to an authorized ViewSonic
service center or ViewSonic.
4. For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties:
THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE
DESCRIPTION CONTAINED HEREIN INCLUDING THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Exclusion of damages:
VIEWSONIC'S LIABILITY IS LIMITED TO THE COST OF REPAIR OR REPLACEMENT OF THE
PRODUCT. VIEWSONIC SHALL NOT BE LIABLE FOR:
1. DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECTS IN THE PRODUCT, DAMAGES
BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, LOSS OF
PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH
BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
2. ANY OTHER DAMAGES, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.
3. ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.
Effect of state law:
This warranty gives you specific legal rights, and you may also have other rights which vary from state
to state. Some states do not allow limitations on implied warranties and/or do not allow the exclusion of
incidental or consequential damages, so the above limitations and exclusions may not apply to you.
Sales outside the U.S.A. and Canada:
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada,
contact ViewSonic or your local ViewSonic dealer.
ViewSonic CRT Monitor Warranty (V3.0)
Release Date: 03-26-2002
ViewSonic
P220f
16
Appendix
Power Cord Safety Guidelines
CAUTION: Use a power cable that is properly grounded. Always use the AC cords listed for each country.
In other areas, use an AC cord which meets local safety standards.
USA................. UL
Canada............. CSA
Germany.......... VDE
Switzerland ..... SEV
Britain ............. BASE/BS
Japan ............... Electric Appliance Control Act
AC PLUG CORD PRECAUTIONS FOR THE UNITED KINGDOM
FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY.
IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET THEN THE PLUG SHOULD BE
CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO AN APPROPRIATE
SOCKET.
If a new plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
WARNING: THIS APPLIANCE MUST BE EARTHED.
IMPORTANT: The wires in this mains lead are coloured in accordance with the following code:
Green-and-Yellow:
Blue:
Brown:
Earth
Neutral
Live
If the coloured wires of the mains lead of this appliance do not correspond with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked by
the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or
coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the plug which is marked
with the letter L or coloured RED.
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed.
The female receptacle of the cord set must meet IEC-60320 requirements and will look like (Figure A1
below):
Figure A1
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA
Labeled. For units which are mounted on a desk or table, type SVT or SJT cord sets may be used. For
units which sit on the floor, only SJT type cord sets may be used. The cord set must be selected according
to the current rating for your unit. Please consult the table below for the selection criteria for power cords
used in the United States and Canada.
Figure A2
Cord Type
Size of Conductors in Cord
Maximum Current Rating of
Unit
SJT
18 AWG
16 AWG
14 AWG
10 Amps
12 Amps
12 Amps
SVT
18 AWG
17 AWG
10 Amps
12 Amps
For European Countries
In Europe you must use a cord set which is appropriate for the receptacles in your country. The cord set is
HAR-Certified, and a special mark that will appear on the outer sheath, or on the insulation of one of the
inner conductors.
If you have any questions concerning which proper power cord to use, please consult with the dealer from
whom you have purchased the product
ViewSonic
P220f
17
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the provided
shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a
shielded BNC(5) cable. Also, any unauthorized changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this device.
Notice for Germany
The x-rays generated in this unit are shielded sufficiently. High voltage: Max. 30 kV. Also, for ergonomic
reasons, we recommend that you do not display blue characters on a dark background. Doing so may
produce insufficient contrast that could lead to eye strain.
Notice for Japan
This is a Class B product based on the standard of the Voluntary Control Council for Interference from
Information Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic
environment, it may cause radio interference. Install and use the equipment according to the instruction
manual.
CE Conformity
The device complies with the requirements of the EEC directive 89/336/EEC as amended
by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/
23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”
ViewSonic
P220f
18
®
ViewSonic Corporation
|