Verilux Indoor Furnishings VF05 User Manual

VF05  
 
IMPORTANT SAFETY INSTRUCTIONS  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
DISMANTLE. THERE ARE NO SERVICEABLE PARTS INSIDE.  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS UNIT TO RAIN OR MOISTURE.  
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR  
PERSONAL INJURY:  
Turn off/unplug and allow to cool before replacing bulb or cleaning.  
Light bulbs get HOT quickly! Do not touch the bulb while the lamp is on.  
• Do not operate the lamp in close proximity to flammable or  
combustible vapors, such as aerosol (spray) products or where  
oxygen is being administered.  
• Use only the type of bulb and maximum wattage indicated by the  
manufacturer.  
• Never cover the lamp when it is in operation.  
Read these instructions – before using this lamp.  
Keep these instructions – for future reference.  
• Do not use this lamp in damp/humid or wet locations.  
• For indoor use only.  
• Clean only with dry cloth.  
• Do not defeat the safety purpose of the polarized plug. A polarized  
plug has two blades with one wider than the other. If the provided  
plug does not fit in your outlet, consult an electrician for replacement  
of the obsolete outlet.  
• Protect the power cord from being walked on or pinched particularly  
at plugs, convenience receptacles, and the point where it exits from  
the lamp.  
• Unplug this lamp during lightning storms or when unused for long  
periods of time.  
• If the lamp has been damaged in any way, such as power-supply  
cord or plug is damaged, liquid has been spilled or objects have  
fallen onto the lamp, the lamp has been exposed to rain or moisture,  
does not operate normally, or has been dropped, it should not be  
operated. There are no user serviceable parts within this lamp.  
SAVE THESE INSTRUCTIONS  
2
 
ASSEMBLY INSTRUCTIONS  
Before assembling, please review all instructions.  
1. Carefully lay out all parts on flat surface as shown in illustration.  
2. Screw post (B) into the base (A) and hand tighten.  
3. Screw post section (C) into post (B) and hand tighten.  
4. Screw body (F) into post (C) and hand tighten.  
5. Rotate shade (H) to right angle with body (F) and parallel to the  
floor. Then, use the (included) allen wrench (G) to carefully tighten  
the screw.  
6. Loosen the thumbscrew (E) to adjust the lamp height. Raise or  
lower the lamp body (F) to the desired height and tighten the  
thumbscrew (E).  
7. Remove the 27 W Natural Spectrum® bulb from the packaging and  
carefully insert it into the socket as demonstrated in Figure 1. Be  
sure to hold the bulb by the base and ensure it is fully inserted into  
the socket and clipped into the metal clip (I).  
8. Note the telephone number on the bulb provides contact information  
when reordering.  
9. Plug lamp into an appropriate outlet and turn on the switch.  
10. Do not use with an extension cord or on a circuit with a dimmer  
switch.  
11. Save the packaging in case you need to send the lamp to Verilux for  
servicing.  
3
 
ASSEMBLY INSTRUCTIONS  
4
 
GENERAL PRECAUTIONS  
• Do not use with power supply voltage other than 120V AC  
• Avoid placing the lamp in areas that are dusty, humid/moist, lack  
ventilation, or are subject to constant vibration.  
• Not for use with light dimmers, timers, motion detectors, voltage  
transformers, or extension cords.  
• Do NOT use lubricating agent in bulb assembly.  
• The light bulb may become loose during transit. To reinstall the light  
bulb, see the bulb installation instructions on page 3.  
• Close supervision is recommended when this lamp is used by or  
near children, or others who may not understand the need for these  
precautions. Do not leave the lamp unattended during use.  
This product may cause interference with radios, cordless  
telephones, or devices that use a wireless remote control,  
such as televisions.  
This lamp has been tested and found to comply with Part 18 of the  
FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This lamp  
generates, uses, and can radiate radio frequency energy and, if  
not used in accordance with the instructions, may cause harmful  
interference to radio communications. If interference occurs try to  
correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the lamp and receiver.  
• Connect the lamp into an outlet on a circuit different from that to  
which the receiver is connected.  
• Move the lamp out of the line of sight of the remote control receiver.  
• Consult the dealer or an experienced radio/TV technician for help.  
Note: This product may cause interference to radio equipment  
and should not be installed near maritime safety communications  
equipment or other critical navigation or communication equipment  
operating between 0.45-30 MHz.  
5
 
TROUBLESHOOTING  
Before requesting service on your Verilux® lamp please read the  
following:  
• Make sure all power connectors, cords, and plugs are inserted fully  
and securely.  
• Make sure there is power to the wall outlet or try another outlet – not  
connected to a dimmer.  
CARE & CLEANING  
Your Verilux® lamp is made from high quality materials that will last for  
many years with a minimum of care.  
Clean only with a soft dry cloth – DO NOT USE SOLVENTS OR  
CLEANERS CONTAINING ABRASIVES OR AMMONIA  
WARNING: To prevent risk of shock or personal injury  
when cleaning lamp, make sure you have turned off and  
unplugged the lamp, and allow sufficient time for the bulb  
to cool.  
6
 

Taylor Freezer TW 357 User Manual
Toshiba Camera Accessories IK HD1D User Manual
Toshiba Cell Phone 300kVA UPS User Manual
Toshiba Laptop A210 EZ2203X User Manual
Toshiba Network Card PROSEC T3 User Manual
Toshiba Power Supply 1500 User Manual
Transcend Information MP3 Player TS4G User Manual
Unitech Scanner Hand Held Scanner User Manual
Vector TV Mount PWA 14 User Manual
VeriFone Video Games PCC 5 7 1h User Manual