Timex Watch W39 User Manual

CHRONOGRAPH  
Watch will count at 1/100 second intervals to 1 hour and 1-second inter-  
vals to 100 hours. It will count up to 199 laps and store 200 laps.  
Run Chrono  
1. Press MODE until CHRONO appears.  
2. Press START/SPLIT to start Chrono. ( will flash).  
W-39 847-095003  
3. Press START/SPLIT again to take a split. Chrono will continue to run in  
background. ( will continue to flash). Press MODE or leave idle for  
10 seconds to return to running Chrono. Lap number will appear in top  
left of display.  
4. Press STOP/RESET to stop or pause Chrono. Press START/SPLIT to  
resume. (Total stopped time will appear in Synchronized Timer).  
THANK YOU FOR PURCHASING YOUR TIMEX WATCH.  
5. To reset Chrono, press and hold STOP/RESET (HOLD TO RESET will  
appear).  
EXTENDED WARRANTY  
Available in U.S. only. Extend your warranty for an additional 4 years  
from date of purchase for $5. You can pay with AMEX, Discover, Visa or  
MasterCard by calling 1 800-448-4639 during normal business hours.  
Payment must be made within 30 days of purchase. Name, address, tele-  
phone number, purchase date, and 5-digit model number required. You  
can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676,  
Dept. EF, Little Rock, AR 72203.  
6. To store workout turn CROWN (with Chrono stopped and CROWN  
pushed in). Display will show available memory.  
7. To recall workout (with Chrono stopped), turn CROWN to select work-  
out by date. Pull CROWN out one stop. Turn CROWN to recall  
laps/splits taken and to view your best and average laps. Push CROWN  
in when finished.  
8. To clear workout, select workout by turning CROWN. Press and hold  
STOP/RESET until clear.  
Please read instructions carefully to understand how to operate  
your Timex watch.  
9. To clear all workouts, with Chrono reset, press and hold STOP/RESET  
until clear.  
Notes:  
FUNCTIONS  
• To view Lap/Split times during a workout, pull CROWN out one stop  
(while Chrono is running) and turn to scroll through details. Current lap  
will not be shown.  
Time, date, hourly chime, Chronograph with split/lap storage, Countdown  
Timer, Interval Timer, Synchronized Timer, Training log, Counter, Ten  
Alarms with daily, weekday, weekend, or weekly alarm choices,  
Appointments, Notes, INDIGLO® night-light with Night-Mode® Feature.  
• To change display format (with Chrono reset) pull CROWN out two  
stops and turn to select Lap/Split (Split large) or Split/Lap (Lap large).  
Push CROWN in to complete setting.  
BASIC OPERATIONS  
COUNTDOWN TIMER  
1. Press MODE until COUNTDN TIMER appears. Turn CROWN to select  
timer 1-10.  
MODE  
2. Pull CROWN one stop and turn to set hours and minutes (up to 24  
hours).  
3. Pull CROWN two stops and turn to set seconds.  
4. Press STOP/RESET or START/SPLIT to select Countdown and Stop  
Countdown and Repeat or Countdown and Start Chrono  
5. Push CROWN in to complete setting.  
,
.
CROWN 1  
STOP/RESET  
6. To select a tone to sound halfway through the count, with the CROWN  
in, press STOP/RESET. 1 / 2 will appear in upper left corner of screen.  
7. Turn CROWN to select other timers. Set as above.  
START/SPLIT  
8. Press START/SPLIT to start countdown . ( will flash). The set time will  
appear at top right of the screen. Press STOP/RESET to pause and  
START/SPLIT to resume. To clear the timer and start over, press and  
hold STOP/RESET.  
A beep will sound and INDIGLO® will flash when time reaches zero.  
Press any button or turn CROWN to silence beep.  
DEMO  
Setting DATE will erase this feature. It will reappear when you change the  
battery.  
Notes:  
• During Countdown and Repeat, the repetition number will appear at  
the top left of the screen in both the countdown and interval timer.  
• Countdown and Start Chrono will not work unless Chrono is reset  
(00:00).  
SET TIME & 12-/24- HOUR TIME DISPLAY  
1. Press MODE until TIME appears.  
INTERVAL TIMER  
2. Pull CROWN one stop. Turn to set correct time.  
3. Press STOP/RESET or START/SPLIT to select 12- or 24-hour time.  
4. Push CROWN in to complete setting.  
You can set multiple timers that coundown in sequence.  
1. Press MODE until INTERVAL TIMER appears. Turn CROWN to select  
timer 1-10.  
5. Press STOP/RESET to select next Time Zone. Press and hold to switch.  
HOLD TO SWITCH will appear. Continue holding until beep sounds.  
2. Set using procedure for Countdown Timer.  
6. Set Time as above. Repeat for next Time Zone.  
3. Press START/SPLIT to start a countdown. When that countdown is  
complete, the timer proceeds to the next non-zero interval that is set  
then repeats entire sequence.  
7. To name Time Zone, pull CROWN two stops. Turn to select first letter.  
Press START/SPLIT to select next letter. Push CROWN in to complete  
setting.  
8. To peek at different Time Zone, press STOP/RESET once for TZ2, twice  
for TZ3.  
SYNCHRONIZED TIMER  
Automatically displays total elapsed time and accumulated stop time for  
either Countdown Timer or Chrono.  
9. To view next appointment, press START/SPLIT. If none is scheduled, NO  
APPOINTMENTS UPCOMING will appear.  
1. Press MODE until SYNCHRO TIMER Appears. Pull CROWN out one stop  
and turn to change format of display (TOTAL/STOP, STOP/TOTAL, or  
TOTAL).  
SET DATE  
2. Start Countdown Timer or Chrono. Timer symbol  
will appear in Synchro Timer display. Display  
or Chrono symbol  
1. Press MODE until DATE appears.  
2. Pull CROWN out one stop. Turn CROWN to set date.  
will show total elapsed time since Countdown Timer or Chrono was  
started and accumulated stop/pause times (unless TOTAL display  
option was selected).  
3. Press STOP/RESET or START/SPLIT to choose between year-month-  
date, month-date-year or date-month-year display.  
3. When Countdown Timer reaches 0 or when Chrono is reset, Synchro  
Timer will display final stop and elapsed times.  
4. Pull CROWN out to second stop. Turn CROWN to select year. Push  
CROWN in to complete setting.  
4. Syncho Timer will automatically reset when either Countdown Timer  
or Chrono is reset and restarted. To reset in Syncho Timer mode, press  
STOP/RESET.  
Note:  
• Day will automatically set itself. Press STOP/RESET or START/SPLIT to  
view week number instead of day of the week.  
 

Timex Watch 568 095003 User Manual
Tivoli Audio Portable Radio IPAL User Manual
TOA Electronics Speaker F 2352SC User Manual
Toastmaster Mixer RHHM16 User Manual
Traulsen Refrigerator VPS48S User Manual
Tripp Lite Surge Protector FRA2TEL User Manual
Tripp Lite TV Cables UP 6C User Manual
Universal Remote Control Universal Remote Universl Remote User Manual
Video Products Computer Hardware PC HDTV CNVTR User Manual
Vizio Projection Television RP56 User Manual