Timex Watch 660 095000 User Manual

Register your product at  
W-229 660-095000 NA  
7
THANK YOU FOR PURCHASING YOUR TIMEX® WATCH.  
EXTENDED WARRANTY  
Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can  
pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment  
must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model  
number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF,  
Little Rock, AR 72203.  
Please read instructions carefully to understand how to operate your Timex® watch.  
FEATURES AND BASIC OPERATION  
Time with 12- or 24-hour format  
Date with MM-DD or DD.MM format  
3 time zones  
Optional hourly chime  
Temperature (-5°F to 125°F or -21°C to 52°C)  
Tide tracker  
100-hour chronograph with display of lap and split times  
24-hour countdown timer (count down and stop or repeat)  
Occasion reminders  
3 daily/weekday/weekend alarms with 5-minute backup  
Customizable mode set  
INDIGLO® night-light with Night-Mode® feature  
Press MODE repeatedly to step through modes: Tide, Chrono, Timer, Occasion, Alarm 1, Alarm 2, and Alarm 3.  
Press MODE to exit current mode and return to Time mode.  
SET  
(DONE)  
START·SPLIT  
(+)  
INDIGLO®  
BUTTON  
MODE  
(NEXT)  
STOP·RESET  
(–)  
Button functions shown with secondary functions in parentheses  
TIME  
To set time, date, and options:  
1) With time and date showing, press and hold SET.  
2) Current time zone (1, 2, or 3) flashes. Press + or - to select the time zone to set, if desired.  
3) Press NEXT. Hour flashes. Press + or - to change hour (including AM/PM); hold button to scan values  
4) Press NEXT. Minutes flash. Press + or - to change minutes  
5) Press NEXT. Seconds flash. Press + or - to set seconds to zero.  
6) Press NEXT. Month flashes. Press + or - to change month.  
7) Press NEXT. Day flashes. Press + or - to change day.  
8) Press NEXT. Year flashes. Press + or - to change year.  
9) Press NEXT to set options. Press + or - to change value and then press NEXT to go to next option. Press  
DONE at any step to exit and save settings. Available options are 12- or 24-hour time format, MM-DD or  
DD.MM date format, temperature unit (Fahrenheit or Celsius), hourly chime N, beep for button presses,  
customizable mode set (Select “HIDE” for unwanted modes - they are removed from mode sequence).  
If you hide a mode, you can turn it back on later using procedure above.  
In Time mode, press START·SPLIT repeatedly to see, in order, temperature, time of next tide, 2nd time zone, and  
3rd time zone. Data is shown for 3 seconds after button is released. Hold START·SPLIT for 4 seconds to keep the  
data you are viewing as the default. If temperature or tide is the default, the first press of START·SPLIT shows  
date. Again, you may hold START·SPLIT button for 4 seconds while the date is visible to return to date as the  
default display. See TEMPERATURE and TIDE sections for more details.  
Press and hold STOP·RESET to see next upcoming occasion (see OCCASION section). Release and immediately  
press and hold again to see subsequent occasions.  
TEMPERATURE  
See TIME section for instructions on displaying temperature.  
When worn on wrist, temperature reading is affected by body heat. For more accurate readings, remove watch  
and put in shade for at least several minutes.  
Watch can measure water temperature also, if submerged. Be sure to select temperature display (See TIME)  
before placing watch in water, as buttons should not be pressed when watch is underwater.  
Temperature readings are taken every minute, and more frequently if temperature is changing.  
TIDE  
Tide mode provides tracking of high and low tides. Press MODE repeatedly until TIDE appears.  
Countdown to next tide is shown at top of display. Time and type of next tide (H = high; L = low) are shown at  
bottom.  
Press + or - to see later or earlier tides. Date of displayed tide is shown rather than countdown. Hold either  
button to scan quickly.  
The primary factor in determining tides is moon position. Tide tracker uses moon position to predict high and low  
tides, which are 6 hours and 12.5 minutes apart.  
Tides are also influenced by sun position and shape of shoreline, so tide clock cannot precisely give times of high  
and low tides. Periodic adjustment may be necessary.  
To set tide tracker, enter time and type of last (most recent) tide:  
1) Press SET. Tide type flashes. Press + or - to select H (high) or L (low) for last tide.  
2) Press NEXT. Hour flashes. Press + or - to change hour (including AM/PM); hold button to scan values.  
3) Press NEXT. Minutes flash. Press + or - to change minutes.  
4) Press NEXT. Number of daily tide cycles flashes. Press + or - to change value. Most locations have 2 cycles  
(2 high and 2 low tides per day). If unsure, leave setting at 2.  
5) Press DONE at any step when done setting.  
For tide information, go to www.timex.com/expedition  
CHRONOGRAPH  
This mode provides a chronograph (stopwatch) function. Press MODE to go to Chrono mode.  
To start, press START·SPLIT. Chrono counts up by hundredths of a second up to one hour, then by seconds up to  
100 hours. Stopwatch icon W flashes to indicate chrono is running.  
To stop, press STOP·RESET. Stopwatch icon W freezes to indicate chrono is stopped.  
To resume, press START·SPLIT, or to reset (clear) chrono, press and hold STOP·RESET.  
When chrono is already running, it will continue to run even if you exit chrono mode. Stopwatch icon W appears  
in TIME mode.  
LAP 1 = 7.11  
LAP 2 = 7.50  
LAP 3 = 7.08  
LAP 4 = 7.30  
SPLIT 1 = 7.11  
SPLIT 2 = 15.01  
SPLIT 3 = 22.09  
SPLIT 4 = 29.39  
While chrono is running, press START·SPLIT to take a split. Lap and split times will be displayed with lap number.  
To set display format, press SET. Then, press + or - to select desired format. Press DONE to exit.  
NOTE:  
When a split is taken, times are frozen on the display for 10 seconds. Press MODE to release display and  
show running chrono immediately.  
TIMER  
Timer mode provides a countdown timer with alert. Press MODE repeatedly until TIMER appears.  
To set countdown time:  
1) Press SET. Hours flash. Press + or - to change hours; hold button to scan values.  
2) Press NEXT. Minutes flash. Press + or - to change minutes.  
3) Press NEXT. Seconds flash. Press + or - to change seconds.  
4) Press NEXT. Action at end of countdown flashes. Press + or - to select STOP or REPEAT, indicated by hourglass  
icon with arrow I.  
5) Press DONE at any step when done setting.  
 

Tiger Games 89 253 User Manual
TOA Electronics Musical Instrument WM 4210 User Manual
Toshiba Electronic Keyboard Electric Keyboard User Manual
Toshiba Telephone CIX Voicemail User Manual
TP Link Network Router TL WR940N User Manual
Troy Bilt Trimmer TB25C5 User Manual
Uniden Headphones BTS200 User Manual
Verilux Blender VH01 User Manual
Verizon Modem USB760 User Manual
Vuzix Video Eyeware AV310 User Manual